TimeTools Ethernet NTP Digital Wall Clock devices obtain time from a NTP Server, such as our NTP s5100 series. The wall clocks utilise this highly accurate reference time to provide a synchronised time display. The devices can be configured to obtain time from any internet or intranet based time source.
The clocks can be configured using a telnet session from a host PC on the network to set parameters such as time-zone settings, daylight saving time and sntp reference clock IP address.
TimeTools NTP s5100 GPS NTP Server an ideal time reference for the NTP Ethernet Digital Wall Clocks.
To aid installation and maintenance, the Digital Time Clock devices are powered using Power-over-Ethernet. This means that no mains spur is required at the location where the clock is to be sited. If your network is not power-over-ethernet enabled, all you need is a small inexpensive power-injector which can be sited behind the clock or in your computer room, for total flexibility.
|
